• Professional Audio Equipment Distributors
  • Portland Maine (207) 773-2424

Audio Restoration

  • CEDAR DNS 4 Hardware Dialogue Noise Suppressor

    The CEDAR DNS 4 Hardware Dialogue Noise Suppressor is used on the highest quality productions and broadcasts to eliminate traffic noise, air conditioning, wind, rain, babble and general background noise from audio. It will help to compensate for unfavourable acoustic conditions and poor microphone placement, and will even suppress excessive reverberation.  The CEDAR DNS 4 [more]

  • !Cedar DNS 8D Hardware Dialogue Noise Suppressor

    The Cedar DNS 8D Hardware Dialogue Noise Suppressor has been designed specifically for broadcast and live sound. With eight channels of noise suppression, it hosts a new algorithm that marries the best of the machine learning and signal processing on which the DNS 8 Live and the DNS 2 dialogue noise suppressors are based. With [more]

  • CEDAR Declickle 3 Software Module for Cambridge

    CEDAR Declickle 3 replaces and greatly improves upon the Declickle algorithm supplied on systems up to CEDAR Cambridge v11. It offers improved detection and removal of clicks and crackle in the presence of musical transients, removing the unwanted sounds in a more transparent fashion than ever before. It looks identical with previous versions so there [more]

  • CEDAR Unwrap Software Module for Cambridge

    CEDAR Unwrap is a unique new process that eliminates this problem and which can rescue previously unusable audio, completely eliminating the distortion to reveal pristine, clear sound. It generates results that seem impossible until you hear it in action. Wrapping is an unusual form of clipping distortion where, instead of being flattened at the maximum [more]

  • CEDAR Studio 9 Software Plug-in Suite for Pro Tools

    Building upon the foundations laid down in CEDAR Studio 7 and CEDAR Studio 8, CEDAR Studio 9 Software Plug-in Suite for Pro Tools improves existing capabilities, adds new modules and extends the suite’s compatibility with a wider range of plug-in formats. CEDAR Studio 9 is supplied as a range of AAX, VST2, VST3 and AU plug-ins [more]

  • CEDAR Trinity 3 Audio Surveillance Software

    The CEDAR Trinity 3 Audio Surveillance Software is a suite of products designed for audio surveillance and related purposes. Depending upon the variant installed, it can monitor and record live feeds for days, weeks, months or even years, load existing audio files, replay and enhance all or any part of a recording, allow multiple users [more]

  • CEDAR SE 1 Hardware Speech Enhancer

    The CEDAR SE 1 Hardware Speech Enhancer is a must for Police, security and counter-terrorism forces who require covert audio surveillance systems that are rugged while remaining as small and light as possible. The SE 1 is simple to operate and able to run on batteries as well as mains power so that it can [more]

  • !CEDAR DNS 2 Hardware Dialogue Noise Suppressor

    CEDAR DNS 2 is a small, light and portable 2-channel hardware dialogue noise supressor that can be used on location as well as in the studio or edit suite. In response to the many requests for a “2-channel DNS 8 Live”, CEDAR undertook to find out what the market really wanted from such a device. [more]

  • CEDAR Cambridge Audio Restoration and Forensics System

    From the most powerful speech enhancement for audio forensics and security to the most demanding high-volume restoration and enhancement for libraries and archives to simple and remarkably rapid noise control and audio processing for broadcast and mastering, CEDAR Cambridge is a 64-bit, high-resolution processing platform that offers a wide range of tools for all of [more]

  • CEDAR EQ-L Linear EQ Software Module for Cambridge

    This form of EQ preserves the symmetry of the waveform and the shapes of sharp transients, and is ideal for general tonal shaping of the signal. EQ-L also includes CEDAR’s unique Constant Power Equalisation which allows you to change the tonal balance of the signal without altering its loudness.The CEDAR Cambridge v12 linear phase EQ [more]

  • CEDAR Adaptive Filters Software Module for Cambridge

    Designed to remove noise from monophonic signals, this offers filter lengths of up to 100,000 taps (although processing constraints may limit the number actually achievable) with user control of the length up to one second. There are user controlled Attack and Release constants, and the filter coefficients are displayed graphically to help the user determine [more]

  • CEDAR Limiter Software Module for Cambridge

    The CEDAR Cambridge v12 Limiter is designed and coded to the highest 64-bit standards and is suitable for the most exacting mastering requirements. The Limiter is far more than simply a severe form of compressor with a very high ratio; it utilises a different signal path to achieve the desired results without unwanted side-effects. When [more]

  • CEDAR Declip Software Module for Cambridge

    Declip is a genuine declipping algorithm that allows you to identify and remove most instances of clipping in a single real-time pass. It does so by presenting a visual indication of the density of sample values in the signal. If the Signal Analysis window displays ‘hard’ vertical edges, this demonstrates that the signal has been [more]

  • CEDAR Phase Correction Software Module for Cambridge

    The Phase Corrector identifies any monophonic component(s) common to a reference channel and the channel(s) being corrected, and then measuring the timing differences between them. If any such errors are detected, the system recreates the signals so that they are accurately aligned. It will track any changes in the error, dynamically updating the amount of [more]

  • CEDAR Debuzz Software Module for Cambridge

    The Debuzz-3 algorithm is our best yet. It provides full-bandwidth processing, removing components across the entire audio spectrum, and it is capable of removing all manner of buzzes and hums with fundamental frequencies as high as 500Hz. Compared with earlier algorithms, it offers improved signal modelling and better component tracking. Having locked on to the [more]

  • CEDAR Dethump Software Module for Cambridge

    Dethump eliminates the low frequency disturbances that cannot be restored using a declick process. It allows the user to identify the audio that constitutes the thump and uses the data in and around this to build up a picture of what the low frequency audio should have been had the thump not occurred. The process [more]

  • CEDAR Declick Software Plug-in for Pyramix

    With both manual- and auto- declick capabilities, CEDAR declick for Pyramix performs at high speed without sacrificing CEDAR quality, and addresses the widest possible range of scratch and click removal problems. auto declick allows the user to process part or all of an entire playlist as an off-line process. Remarkably, there is no need for [more]

  • CEDAR Dynamics Software Module for Cambridge

    The 64-bit Dynamics Processor contains three powerful but precise modules: a compressor, an upward expander and a downward expander. Each of these modules offers eight audio channels, and you can use any combination of the processes simultaneously.Designed to the very highest audio standards, all three modules offer precise envelopes with postive and negative read-ahead, so [more]

  • CEDAR Retouch Software Plug-in for Pyramix

    CEDAR Retouch is a huge leap forward in sound processing technology. Unlike conventional restoration tools, it allows you to define the temporal and spectral content of the sound you want to remove. This makes it possible to identify noises as varied as coughs, squeaky chairs, page turns, the creak of a piano pedal and even [more]

  • CEDAR Compressor Software Module for Cambridge

    The 64-bit Dynamics Processor contains three powerful but precise modules: a compressor, an upward expander and a downward expander. Each of these modules offers eight audio channels, and you can use any combination of the processes simultaneously. Designed to the very highest audio standards, all three modules offer precise envelopes with postive and negative read-ahead, [more]

  • CEDAR Retouch Software Module for Cambridge

    CEDAR Retouch 4 is a huge leap forward in sound processing technology. Unlike conventional restoration tools, it provides a wide range of time/frequency editing (TFEâ„¢) capabilities, and allows you to define the temporal and spectral content of the sound you want to remove. Furthermore, you are not limited to simple ‘rectangular’ definitions of complex sounds: [more]

  • CEDAR Respeed Software Module for Cambridge

    Respeed automatically identifies – or allows the user interactively to identify – unwanted speed changes contained within the presented audio. Once these have been determined the track may be processed many times faster than real-time. The result is greater pitch stability and, when used on speech signals, improved intelligibility. However, musical pitch variations such as [more]

  • CEDAR Auto Dehiss Software Module for Cambridge

    Auto Dehiss embodies a more advanced algorithm than any previous dehisser. It offers significantly improved performance and has a unique “Auto” mode that enables the software to determine the broadband noise content, removing this without the introduction of unwanted side-effects or artefacts. The module can also be used in manual mode that allows you to [more]

  • CEDAR Reshape Software Module for Cambridge

    Reshape identifies the tonal and spatial characteristics of a template track (or tracks) and is able to impose these upon the audio that you are processing. The combined effect allows you to create tracks with desired EQ characteristics and a pleasing soundstage even if you have little or no experience of mastering audio. It does [more]

  • CEDAR Advanced Noise Removal Software Module for Cambridge

    Building upon the latest noise reduction algorithm developed for the rackmount CEDAR Duo™ DDH Auto Dehisser and the Auto Dehiss process already available on CEDAR Cambridge, NR-5 marries our best signal processing with numerous facilities that help you to achieve the best possible results. It will work equally well with or without a noise fingerprint, [more]

  • CEDAR Manual Declick Software Module for Cambridge

    Manual Declick is ideal for restoring audio that suffers from problems for which Declickle 2 is not ideal. It allows users to specify the audio that constitutes the unwanted noise, and the algorithm – optimised for long clicks and scratches – will remove noises such as those found on optical soundtracks, as well as drop-outs [more]

  • CEDAR Adaptive Limiter Software Module for Cambridge

    Unlike a traditional limiter or a multi-band device, CEDAR’s adaptive limiter employs a unique new algorithm developed by CEDAR. With peak and oversampling modes, it calculates a continuingly varying EQ profile that constrains the amplitude of the output while retaining the integrity of the input. The result is a signal that sounds louder while remaining [more]

  • CEDAR EQ-P Precision EQ Software Module for Cambridge

    This form of EQ is particularly suitable for precision removal of constant tones and for brick-wall filtering, and is as much at home in the audio forensic laboratory as it is in the mastering studio or post-production suite. It provides high Qs across the spectrum, is totally free of pre-echo, and offers the minimum latency [more]

  • CEDAR Dynamic Noise Suppressor Software Module for Cambridge

    The CEDAR Cambridge v12 DNS module helps remove the rumble, the hiss, the whistles, the broadband noise and the “shot” noise from contaminated sounds. DNS splits the signal into a large number of well-defined bands, and sophisticated digital filters then analyse each of these bands, suppressing the noise independently in each. The innovative design of [more]

  • CEDAR Dehiss Software Plug-in for Pyramix

    CEDAR dehiss is a fully-featured package for cleaning up audio for post, CD and DVD mastering, soundtrack restoration, broadcast, and sound archives. It is remarkably simple to use, but is nonetheless a powerful and effective package that allows you to: 1) audition cleaned audio and adjust parameters in real-time 2) render back to disk in [more]

  • CEDAR Decrackle Software Plug-in for Pyramix

    CEDAR decrackle for Pyramix doesn’t only remove the tiny clicks, crackles and “grunge” from vintage discs and vinyl LPs… it removes many types of buzz, and can be extremely effective at reducing amplitude distortions. With no parameters for you to worry about, CEDAR’s adaptive algorithms will identify and remove all of these noises automatically, making [more]