• Professional Audio Equipment Distributors
  • Portland Maine (207) 773-2424

Preamps

  • DACS Clarity MicAmp 500 Solid-State Microphone Pre-Amp

    SMALL20DACS20MicAmp2050020Flat20front20view20Edit.jpg

    With the DACS Clarity MicAmp 500, what you hear in the live room is what you get in the control room. This ultra-low noise microphone amplifier delivers very fine detail, and a strikingly realistic sound. The frequency response is flat (for non phantom mode) down to below 1Hz at the bottom and does not start [more]

  • Merging Technologies Hapi Small Format Network Audio Interface

    merging-hapi-2014.jpg

    The Merging Technologies HAPI is the son of their Horus. Born from the most flexible and sonically transparent audio interface and providing the same RAVENNA / AES67 connectivity as its father, HAPI is both the perfect primary interface for smaller systems as well as the ultimate accessory for a system using Horus where control room [more]

  • Merging Technologies Horus Networked Audio Interface

    Horus-Front-TFT-Glow.jpg

    Horus might be one of the worlds most sonically transparent Mic Pre’s. Horus might also be one of the most phenomenal AD/DA boxes on the market. Horus could very well be the ultimate answer to anyone wanting Analogue/AES/MADI interconnectivity in the room they work in. It is a revolution in “bang for buck” technology and [more]

  • Thermionic Culture Earlybird 4 Tube Mic Pre-Amp

    EB4REDFront20Top.jpg

    The Earlybird 4 contains 4 channels of extremely high quality valve pre-amplification. Originally made in black in 1999, this is a special “revival” limited edition in red (limited to 49 only). The black edition is still available with the updated circuitry.. As the individual channel circuitry in this version of the Earlybird has been simplified [more]

  • Thermionic Culture Earlybird 2.2 Tube Mic Pre-Amp/EQ

    EB2-2FrontTop.jpg

    The Earlybird 2.2 contains 2 channels of very high quality valve pre -amplification. The circuit design utilises a ‘push pull’ ‘class A’ type of amplification in order to provide ultimately clean gain, giving the lowest noise and distortion figures possible in a mic pre-amplifier. The input and output transformers have been designed by working together [more]

  • Thermionic Culture Nightingale Tube Mic Pre-Amp/EQ/Compressor

    NightFrontTop.jpg

    The Nightingale is a 2 channel mic amp/equaliser and also a mono compressor, based around the now classic Phoenix design, with summing facilities included.The 2 preamplifiers with EQ and the compressor can all be used individually or may be combined in 3 different modes by using the summing section. This can be done whilst still [more]

  • Thermionic Culture Rooster Tube Mic Pre-Amp/EQ/Distorter

    RoosterFrontTop.jpg

    The Rooster is a 2 channel all valve preamp with EQ and distortion controls. It is designed for a wide range of applications and can produce a large range of tones, harmonic distortion and subtle dynamic control. The preamp can be used to add gain to mic, line or DI input signals. The double triode [more]

  • DACS Clarity MicAmp 2 Solid-State Microphone Pre-Amp

    dac2micamp.jpg

    The DACS Clarity MicAmp 2 is almost certainly the finest two channel, ultra low noise, discrete component based microphone amplifier available in the industry today. If a microphone pre-amp adds anything more than clean gain to the audio signal on its way from the microphone to the recording medium, whatever that extra is, it then becomes an [more]

  • Sonifex RB-MA1 Solid-State Microphone Pre-Amp

    rb-ma1-iso.jpg

    The RB-MA1 consists of a low noise microphone pre-amplifier for converting mic level signals to line level, or for driving long lines from microphones to mixing equipment.

  • Sonifex RB-MA2 Solid-State Microphone Pre-Amp

    rb-ma2-iso.jpg

    The RB-MA2 consists of two independent low-noise microphone pre-amplifiers for converting mic level signals to line level, or for driving long lines from microphones to processing equipment.

  • Sonifex RB-DMA2 Solid-State Microphone Pre-Amp

    rb-dma2-iso.jpg

    The RB-DMA2 consists of two independent low-noise microphone pre-amplifiers for converting microphone level signals to a digital AES/EBU or S/PDIF output. Individual analogue balanced line level outputs are also produced for use, for example, to feed talkback systems. The unit can either be used as two independent microphone amplifiers, or one mic input can be [more]