• Professional Audio Equipment Distributors
  • Portland Maine (207) 773-2424

Solid-State Mic Pre-Amps

  • Merging Technologies Hapi Small Format Network Audio Interface

    merging-hapi-2014.jpg

    The Merging Technologies HAPI is the son of their Horus. Born from the most flexible and sonically transparent audio interface and providing the same RAVENNA / AES67 connectivity as its father, HAPI is both the perfect primary interface for smaller systems as well as the ultimate accessory for a system using Horus where control room [more]

  • DACS Clarity MicAmp 500 Solid-State Microphone Pre-Amp

    SMALL20DACS20MicAmp2050020Flat20front20view20Edit.jpg

    With the DACS Clarity MicAmp 500, what you hear in the live room is what you get in the control room. This ultra-low noise microphone amplifier delivers very fine detail, and a strikingly realistic sound. The frequency response is flat (for non phantom mode) down to below 1Hz at the bottom and does not start [more]

  • Merging Technologies Horus Networked Audio Interface

    Horus-Front-TFT-Glow.jpg

    Horus might be one of the worlds most sonically transparent Mic Pre’s. Horus might also be one of the most phenomenal AD/DA boxes on the market. Horus could very well be the ultimate answer to anyone wanting Analogue/AES/MADI interconnectivity in the room they work in. It is a revolution in “bang for buck” technology and [more]

  • DACS Clarity MicAmp 2 Solid-State Microphone Pre-Amp

    dac2micamp.jpg

    The DACS Clarity MicAmp 2 is almost certainly the finest two channel, ultra low noise, discrete component based microphone amplifier available in the industry today. If a microphone pre-amp adds anything more than clean gain to the audio signal on its way from the microphone to the recording medium, whatever that extra is, it then becomes an [more]

  • Sonifex RB-MA1 Solid-State Microphone Pre-Amp

    rb-ma1-iso.jpg

    The RB-MA1 consists of a low noise microphone pre-amplifier for converting mic level signals to line level, or for driving long lines from microphones to mixing equipment.

  • Sonifex RB-MA2 Solid-State Microphone Pre-Amp

    rb-ma2-iso.jpg

    The RB-MA2 consists of two independent low-noise microphone pre-amplifiers for converting mic level signals to line level, or for driving long lines from microphones to processing equipment.

  • Sonifex RB-DMA2 Solid-State Microphone Pre-Amp

    rb-dma2-iso.jpg

    The RB-DMA2 consists of two independent low-noise microphone pre-amplifiers for converting microphone level signals to a digital AES/EBU or S/PDIF output. Individual analogue balanced line level outputs are also produced for use, for example, to feed talkback systems. The unit can either be used as two independent microphone amplifiers, or one mic input can be [more]