Visit the manufacturer's site for expanded information  |
 |
 |
 |
| The CM-CU21 is a high quality, portable Commentator Unit. Its sturdy construction and flexibility of features make it suitable for use in a wide variety of environments. It provides two fully featured commentator positions and a third guest position that can alternatively be used as a line-level input. Each position has an individual output, with two additional outputs providing a mix of all active commentary channels. A limit indicator on the main panel shows when the adjustable limiter on the mix outputs is active, and a bright 21 segment LED PPM meter, which can be disabled, shows the main output level. |
- Features of the CM-CU21 Commentator Unit
- 2 Commentator positions plus a guest position, each with individual outputs; plus 2 mix outputs.
- Talkback outputs selectable by the two main commentators, with built in limiter.
- 4 Return audio circuits that are routed to headphones along with all the commentator inputs. Any source can be individually level controlled and sent to left, right or both ears.
- A wide input gain range and switchable phantom power on each commentary position allows support of a variety of microphone types including low output ribbon, headsets and high output phantom powered microphones.
- Individually switched 48V phantom power on all microphone inputs.
- User preset adjustable limiter on main mix outputs with limit activity indication.
- Built in line-up tone for initial cabling checks.
- 21 Segment LED PPM meter showing main output level.
- Transformer balanced inputs and outputs.
- Fitted formica ‘Sharpie’ designation strips.
- Robust mechanical design with protection for potentiometer knobs.
- Universal AC mains, or 12-24 volt DC power.
|
| |
|
|
|
The Reference Monitor Range is a new series of rack-mount audio monitors, combining the latest DSP technology with outstanding audio enclosure design to produce monitors of the highest standards with exceptional sound quality, a comprehensive feature set and good looks in the rack.
The speaker system comprises a three-way arrangement with two mid/high frequency speakers providing excellent stereo imaging and a separately driven, forward facing, dual magnet, mono bass driver.
Custom-moulded, profiled, HF enclosures are used to minimize standing waves and eliminate response peaks, and acoustic damping in the HF enclosures is used to reduce coloration, effectively creating a separate, sealed, infinite-baffle enclosure for each driver.
A DSP-based electronic equalization is used to flatten the frequency response and also enables the 5 band parametric EQ. Additionally, the fast-attack DSP loudspeaker limiter protects the drivers from overload damage.
|
 |
 |
 |
| RM-2S4 - Reference Monitor, 2 LED meters, 4 stereo channel audio inputs. |
RM-2S10 - Reference Monitor, 2 LED meters, 10 stereo channel audio inputs. |
RM-4C8 - Reference Monitor, 4 LED meters, 8 channel inputs, dual selectors. |
|
In addition to the Reference Monitor range of 1U rack-mount audio monitors are two confidence monitors. Using the same outstanding speaker system as the Reference Monitor range, the confidence monitors offer a superb sound with a cut-down feature set. |
|
|
| RM-CA2 - Confidence Monitor, 2 LED Meters & 2 Stereo Inputs. |
RM-CAD8 - Confidence Monitor, 2 LED Meters, 2 Analog & 6 Digital Stereo Inputs. |
| Reference Monitor Meters |
|
The new Reference Monitor Meters are a range of freestanding and 1U rack-mount precision meters offering accurate, high resolution metering of between 1 and 4 stereo audio sources.
Each stereo source is auto-switching between either analogue or digital AES/EBU format with sample rates up to 192kHz accepted.
|
 |
The level of each stereo source is displayed on a pair of bright, multi-coloured bargraph meters, with a large choice of accurately modelled scales/responses to suit different applications and local preferences. Separate 5 LED phase meters indicate channel correlation or phase error conditions, and additional LEDs show digital input lock and audio level alarm status.
On the rear panel, open-collector alarm outputs provide hardware indication of audio under-level or silence, audio over-level, sustained phase errors above 90 degrees and digital source lock. Status monitoring and unit ID functions, plus firmware updates to add extra functionality, are all accessible remotely via a RS232 connection in conjunction with Sonifex SCi software. All Reference Monitor Meters operate from global mains voltages (85-264V AC, 47-63Hz) without adjustment.
There are nine scales available with accurately modelled ballistics. Each stereo meter pair can have a different scale, set via a DIPswitch on the rear panel. A complete set of overlays are provided per stereo meter so that you can define the scale(s) that you need. |
|
RM-M1F53 1 Stereo 53 Segment Meter, Free-Standing The RM-M1F53 is a free-standing, single stereo channel meter with bright, multi-coloured 53-segment bargraph meters. |
|
RM-M2F53 2 Stereo 53 Segment Meters, Free-Standing The RM-M2F53 is a free-standing, twin stereo channel meter with bright, multi-coloured 53-segment bargraph meters. |
|
RM-M4R53 4 Stereo 53 Segment Meters, Rack-Mount The RM-M4R53 is a 1U rack-mount which combines 2 x RM-M2R53 units, providing 4 stereo channel monitoring. |
|
RM-M1F106 1 Stereo 106 Segment Meter, Free-Standing The RM-M1F106 is a single stereo channel free-standing meter but with 2 stereo inputs and a front panel source selector. This unit has a pair of multi-coloured 106-segment bargraph meters for greater display accuracy. A front panel mounted push-button selects the input source to be monitored, from either of the 2 auto-switching analogue or digital AES/EBU stereo inputs, or from a mono mix of each channel, with channel 1 shown on the left meter and channel 2 shown on the right meter. |
|
RM-M2R106 2 Stereo 106 Segment Meters, Rack-Mount A dual rack mount version, the RM-M2R106, combines 2 x RM-M1R106 units, giving 4 stereo channel monitoring. |
|
|
 |
The Sonifex "Redbox" Range consists of inexpensive interconnection boxes for use in various applications for radio stations, TV studios, video and recording studios. These units are housed in red anodized aluminum boxes which can be screw mounted or rack mounted. |
| |
|
The Net-Log is a new way to record and play audio. The Net-Log overcomes the inherent unreliability of PCs for long term recording by providing a dedicated hardware recording platform that uses a simple network connection for audio playback. The Net-Log is able to record 4 mono, or 2 stereo audio streams for play back over TCP/IP. Audio is encoded in mpeg layer 2 format and written to a large internal IDE hard disk. Playback is carried out by streaming the audio across a network onto one or more PC's. All the Net-Log configurations and operational features are controlled from the PC using Net-Log Windows software. Each Net-Log has it's own IP address, so a number of machines can be installed on the same network.
|
|
D:Scribe Standalone is a package of PC transcription software together with a 3 pedal foot-controller, for simple, fast and effective transcription of pre-recorded audio files.
D:Scribe Standalone is the perfect transcription package to use for quick, simple voice-to-text conversion which can be used either with it’s own text editor, or which can “float” on top of another application, such as MS Word™.
D:Scribe Standalone has all the transcription features of the full Client & Server version, but doesn’t have the management database structure for multiple clients. |
D:Scribe Standalone is ideally suited to self-employed transcribers, or small offices, where the original audio material is recorded off-site and distributed either electronically (e-mail) or by CD-ROM.
|
|
|
 |
DHY-03
The DHY-03 is the digital counterpart to the HY-03. Like the HY-03, it is suitable for most general telephony applications and is often used in radio and TV stations, bingo halls and dealing floors. The DHY-03 is suited to any application requiring substantial line balance rejection, echo cancellation and automatic ducking.
Also available in rack-mount & twin rack-mount versions |
 |
HY-03
The HY-03 is a high quality analogue telephone hybrid, which is suitable for most general telephony applications and is often used in radio and TV stations, bingo halls and dealing floors. The analogue HY-03 telephone hybrid is the replacement for the HY-02, which for many years has set the standard as an excellent value, high quality telephone hybrid. The HY-03 can be used for any application where a clean telephone signal is required and the line is not subject to delay. The HY-03 retains many of the features of the HY-02 and adds some additional ones.
Also available in rack-mount & twin rack-mount versions
|
 |
Talkback Intercoms
Talkback refers to the standard method of communication between broadcast studios. Each studio has either a desktop, a rack-mount, or mixer-mounted intercom, usually containing a row of switch buttons. Each switch button connects to another studio when pressed, and routes the presenter audio to it.
* There are 4 products in the Sonifex Talkback Intercom range : TB-6D - 6 Way Talkback Intercom, desktop free standing
* TB-6R - 6 Way Talkback Intercom, 19" rack mounted
* TB-SD - Station Master Talkback Intercom, desktop free standing
* TB-SR - Station Master Talkback Intercom, 19" rack mounted
The TB-6D and TB-6R are general talkback interfaces which can be connected together to form a talkback system. The TB-SD and TB-SR are talkback units which only operate when connected to the Sonifex Station Master studio switcher.
|
 |
S1 Broadcast Mixer
The S1 has an amazing feature set and offers a proper broadcast solution to community, educational and student radio stations that need a versatile, reliable radio broadcast mixer. It has a ‘no compromise on quality’ approach with excellent mic amps, comprehensive facilities & simple, reliable operation.
- High performance, ultra-reliable on-air radio mixer.
- Low cost.
- Easy to use.
- Small footprint, flush-mounting or rack-mounting.
- Analogue & digital inputs & outputs.
- Main stereo output buss plus 2 Aux output busses, pre or post fader selectable.
- Rotating rear panel for ease of installation.
- Integrated power supply.
- Remote outputs per channel.
- Fader start of ancilliary equipment such as CD players.
- Programmable general purpose I/O.
- Monitor muting on mic live.
- Mic-live/on-air sign switching.
- Monitor outputs for presenter & guest headphones, & speakers.
- Bright LED meter display PPM/VU selectable with separate meterbridge output.
- 100mm ALPS long-throw faders with control via VCAs.
- Separate telco & stereo cleanfeed o/ps for use with a telephone hybrid & codec respectively.
- Advanced automation facilities.
- Remote control via free SCi software.
|
 |
S2 Broadcast Mixer
Following on from the Sovereign range of audio mixers, S2 combines all the features needed of a radio broadcast mixer in a stylish, flush-mounting chassis : a wide range of input and output channels, PFL/cue, fader-start operation of equipment, automatic monitor muting on mic-live, light switching remote outputs, optional EQ on input modules, gram amp input options and 2 main audio buses, allowing you to broadcast on the PRG bus while recording on the AUD bus, with bus output selection on each module.
The S2 chassis is available in 5 module width sections, allowing 5, 10, 15, 20, 25 and 30 module width mixers. This means S2 can be used for small newsrooms or large on-air situations. An optional bus cable allows two mixers to be combined in a split-desk configuration.
- Modular "pop-up" input and output channels means that the mixer can be maintained simply and quickly.
- Input channels can be individually removed and repaired whilst still on-air.
- The angle of the meterbridge can be varied and set for best viewing position.
- Any module can be in any position so that customizing the mixer for your own purposes is easy.
- Large back-lit buttons allow you to see the status of the mixer at all times.
- The fitted rear panel hides all cable connections but can be simply unclipped and reclipped for maintenance.
- The modular design of the desk gives you the flexibility to expand it at a later date. You can even add another S2 mixer and link them together with a bus connector cable to allow for split desk configurations.
|
|
SignalLED Range of RGB LED Signs For Studios
The SignalLED range of illuminated RGB LED signs are a new range of signs designed for installers. Because the sign itself contains the control electronics, and RGB LEDs are used, the signs can be simply configured onsite for your particular requirements.
|
|
